GeoTerva Gratis per 7 giorni

Modulo gruppo di pali

Carico su ciascun palo, effetto di gruppo, cedimento e risposta orizzontale di un gruppo in terreno stratificato.

Ogni modulo è accessibile gratuitamente per 7 giorni creando un account gratuito. Undici moduli si aprono senza alcun account su un esempio di calcolo: provali.

Un gruppo di pali verticali sotto una piastra rigida, in un massimo di otto strati di sabbia e argilla. Il carico sulla piastra viene ripartito tra i pali; la capacità portante viene calcolata sia come pali singoli, ciascuno strato con l'efficienza del proprio terreno, sia come blocco, assumendo il valore minore; il cedimento è dato dal cedimento elastico del gruppo e dalla consolidazione dell'argilla sottostante a 2L/3; sotto carico orizzontale le file lo ripartiscono in modo non uniforme mediante moltiplicatori p sulle curve p–y degli strati.

Parametri di input

  • File e pali, interasse, sezione e lunghezza
  • Fino a otto strati, sabbia o argilla
  • Falda freatica
  • Carico verticale, carico orizzontale e momenti sulla piastra

Si ottiene

  • Il carico su ogni palo, a compressione e trazione
  • Efficienza, capacità a blocco e carico ammissibile
  • Cedimento elastico e di consolidazione
  • Lo spostamento della piastra e il carico di ogni fila
Pali · Gruppo di pali
Modulo gruppo di pali: le sue schermate su esempio di calcolo, modello, risultati, calcoli e teoria

Il disegno e l'esito della verifica dopo aver fatto clic su Analizza.

Approfondisci

Altri moduli in Pali

Perché è semplice da usare

Online, nel tuo browserNulla viene eseguito sul tuo computer tranne il browser: apri la pagina e lavora.
Nessun dongle, nulla da installareNessuna chiave di licenza, nessun blocco hardware, nessuna installazione da aggiornare.
Su smartphone, tablet o PCLo stesso modulo in qualsiasi browser recente, con l'interfaccia adattata al dispositivo.

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.