GeoTerva Gratis per 7 giorni

Modulo scavo puntonato in sabbia

Pressione apparente, puntoni, travi di ripartizione e paratie in sabbia.

Ogni modulo è accessibile gratuitamente per 7 giorni creando un account gratuito. Questo modulo si apre anche senza alcun account su un esempio di calcolo: prova la demo gratuita.

Diagramma apparente delle spinte di Peck per sabbia con falda al di sotto o al di sopra del fondo scavo, carichi nei puntoni ottenuti dal metodo delle campate incernierate e moduli di resistenza del rivestimento e delle travi di ripartizione. In caso di scavo prosciugato, viene verificato il fattore di sicurezza contro il sifonamento.

Parametri di input

  • Profondità e larghezza dello scavo
  • γ e φ′ della sabbia, falda freatica
  • Quote e interasse dei puntoni
  • Gradi d'acciaio e normativa

Si ottiene

  • L'inviluppo delle spinte
  • Il carico in ciascun puntone
  • Sezioni del rivestimento e delle travi di ripartizione
  • Fattore di sicurezza contro il sifonamento
Scavi puntonati · Scavo puntonato in sabbia
Modulo scavo puntonato in sabbia: schermate dell'esempio di calcolo, del modello, dei risultati, dei calcoli e della teoria

Il disegno e l'esito della verifica dopo aver fatto clic su Analizza.

Approfondisci

Altri moduli in Scavi puntonati

Perché è semplice da usare

Online, nel tuo browserNulla viene eseguito sul tuo computer tranne il browser: apri la pagina e lavora.
Nessun dongle, nulla da installareNessuna chiave di licenza, nessun blocco hardware, nessuna installazione da aggiornare.
Su smartphone, tablet o PCLo stesso modulo in qualsiasi browser recente, con l'interfaccia adattata al dispositivo.

Questions about the Braced cut in sand module

What does the GeoTerva Braced cut in sand module calculate?

Apparent pressure, struts, wales and sheeting in sand. Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.

What do I enter in the Braced cut in sand module?

Cut depth and width; sand γ and φ′, water table; strut levels and spacing; and steel grades and code.

What results does the Braced cut in sand module give?

The pressure envelope; the load of every strut; sheeting and wale sections; and factor of safety against piping. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in sand module use?

Peck (1969); EN 1993-1-1; and AISC 360-22.

How much does the Braced cut in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.