GeoTerva 7 दिनों के लिए निःशुल्क

रेत में ब्रेस्ड कट मॉड्यूल

रेत में आभासी दाब, स्ट्रट, वेल और शीटिंग।

प्रत्येक मॉड्यूल निःशुल्क खाते के साथ 7 दिनों के लिए खोलने हेतु निःशुल्क है। यह मॉड्यूल एक हल किए गए उदाहरण पर, बिना किसी खाते के भी खुलता है: निःशुल्क डेमो आज़माएं।

आधार के नीचे या ऊपर जल स्तर वाली रेत के लिए Peck का एनवेलप, कब्जेदार स्पैन से स्ट्रट भार, और शीटिंग तथा वेल के काट मापांक (Section moduli)। जब उत्खनन को जलरहित किया जाता है तो पाइपिंग के विरुद्ध सुरक्षा गुणांक की जांच की जाती है।

आप दर्ज करते हैं

  • कट की गहराई और चौड़ाई
  • रेत γ और φ′, जल स्तर
  • स्ट्रट स्तर और रिक्ति
  • स्टील ग्रेड और कोड

आपको मिलता है

  • दाब आरेख (Pressure envelope)
  • प्रत्येक स्ट्रट का भार
  • शीटिंग और वेल काट
  • पाइपिंग के विरुद्ध सुरक्षा गुणांक
ब्रेस किए गए उत्खनन · रेत में ब्रेस्ड कट
रेत में ब्रेस्ड कट मॉड्यूल: हल किए गए उदाहरण, मॉडल, परिणाम, गणनाओं और सिद्धांत पर इसकी स्क्रीन

विश्लेषण के बाद आरेख और निर्णय।

आगे बढ़ें

ब्रेस किए गए उत्खनन में अधिक मॉड्यूल

यह उपयोग में आसान क्यों है

ऑनलाइन, आपके ब्राउज़र मेंआपके कंप्यूटर पर ब्राउज़र के अलावा कुछ नहीं चलता: पेज खोलें और काम करें।
कोई डोंगल नहीं, कुछ भी इंस्टॉल करने की आवश्यकता नहींकोई लाइसेंस कुंजी नहीं, कोई हार्डवेयर लॉक नहीं, अद्यतन रखने के लिए कोई इंस्टॉलेशन नहीं।
फ़ोन, टैबलेट या पीसी परकिसी भी वर्तमान ब्राउज़र में वही मॉड्यूल, डिवाइस के लिए व्यवस्थित स्क्रीन लेआउट के साथ।

Questions about the Braced cut in sand module

What does the GeoTerva Braced cut in sand module calculate?

Apparent pressure, struts, wales and sheeting in sand. Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.

What do I enter in the Braced cut in sand module?

Cut depth and width; sand γ and φ′, water table; strut levels and spacing; and steel grades and code.

What results does the Braced cut in sand module give?

The pressure envelope; the load of every strut; sheeting and wale sections; and factor of safety against piping. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in sand module use?

Peck (1969); EN 1993-1-1; and AISC 360-22.

How much does the Braced cut in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.