GeoTerva Open the module

Formulas and tables · Pile groups

Load on each pile of a group: the rigid pile cap formula

How a rigid cap shares a vertical load and two moments among its piles: the formula, the sums Σx² and Σy² of the usual layouts, when a pile goes into tension, and a worked example with the load on every pile.

  • Free to read
  • V, Mx, My
  • Rigid cap
  • Worked example

1The rigid-cap ruleThe cap moves as a plane.

A pile cap is usually taken as rigid and its piles as identical vertical springs. A rigid cap moves as a plane — it settles and rotates, but does not bend — so the shortening of each pile, and with it the load the pile takes, is a linear function of its position. With x and y measured from the centroid of the piles, every pile takes an equal share of the vertical load V and a part of each moment in proportion to its distance from the centroid:

Pi=Vn±Myxi∑x2±Mxyi∑y2

n is the number of piles, My the moment about the y axis and Mx the moment about the x axis, both taken at the base of the cap. A moment adds compression on the side it turns the cap towards and takes it away on the other: in the GeoTerva pile group module a positive My adds compression on the +x side, a positive Mx on the +y side, and compression is positive. A lateral load H acting at a height h above the base of the cap adds a moment Hh. It is the same rule as for an eccentrically loaded group of bolts.

2Unsymmetric groupsWhen Σxy is not zero.

The formula above holds when the piles are symmetric about both axes, as in a rectangular grid, so that Σxy = 0. In general the load on a pile is Pi = V/n + Bxi + Cyi, and B and C follow from the equilibrium of the two moments, ΣPixi = My and ΣPiyi = Mx:

B=My∑y2−Mx∑xy∑x2∑y2−(∑xy)2,C=Mx∑x2−My∑xy∑x2∑y2−(∑xy)2

A staggered group, with every second row shifted by half a spacing, is not symmetric about the axis along its rows when it has an even number of rows: a moment about one axis then loads the piles about the other as well. The GeoTerva module takes Σx², Σy² and Σxy from the positions of the piles themselves, so the same equations serve both arrangements.

3Σx² and Σy² of rectangular groupsA closed form, and the loads of the usual layouts.

For a rectangular grid of nx piles along x at the spacing sx and ny along y at sy, the sums have a closed form:

∑x2=nysx2nx(nx2−1)12,∑y2=nxsy2ny(ny2−1)12
Table 1. The usual grids at s = 1.50 m both ways under V = 3600 kN and My = 900 kN·m
Group nx × nynΣx² (m²)Σy² (m²)Pmax (kN)Pmin (kN)ex for no tension (m)
2 × 242.252.251200.0600.00.75
2 × 363.389.00800.0400.00.75
3 × 269.003.38750.0450.01.00
3 × 3913.5013.50500.0300.01.00
3 × 41218.0033.75375.0225.01.00
4 × 31233.7518.00360.0240.01.25
4 × 41645.0045.00270.0180.01.25
5 × 525112.50112.50168.0120.01.50

nx piles along x, the direction of the moment arm of My. The last column is the largest eccentricity ex = My/V at which no pile is in tension, Σx²/(n xmax). Values computed by GeoTerva with the function its pile group module uses.

4When a pile goes into tensionThe eccentricity of the load.

The pile farthest from the centroid on the side away from the moment carries the least load. Under My alone it stays in compression as long as

Vn−Myxmax∑x2≥0⇔ex=MyV≤∑x2nxmax

For a 3 × 3 grid at spacing s the limit is ex = 2s/3. With both moments the corner pile on the side away from both is the critical one, and both terms are subtracted. Beyond the limit the pile is pulled upwards and must be checked in tension: its shaft alone resists, and the weight of the pile helps. The GeoTerva module lists every pile in tension and checks it, and the piles in tension together, against their uplift capacity.

5Worked exampleSix piles under a vertical load and two moments.

A rigid cap rests on six piles, 3 along x and 2 along y, at s = 1.50 m both ways. At the base of the cap it carries V = 2400 kN, My = 540 kN·m and Mx = 180 kN·m. About the centroid of the piles, Σx² = 9.000 m², Σy² = 3.375 m² and Σxy = 0, so

V/n = 2400/6 = 400.0 kN, My/Σx² = 540/9.000 = 60.00 kN/m and Mx/Σy² = 180/3.375 = 53.33 kN/m.

Table 2. The load on each pile of the worked cap
Pilex (m)y (m)V/n (kN)Myx/Σx² (kN)Mxy/Σy² (kN)P (kN)
1−1.50−0.75400.0−90.0−40.0270.0
2−1.500.75400.0−90.040.0350.0
30.00−0.75400.00.0−40.0360.0
40.000.75400.00.040.0440.0
51.50−0.75400.090.0−40.0450.0
61.500.75400.090.040.0530.0

Compression positive. Values computed by GeoTerva with the function its pile group module uses.

The most loaded pile is pile 6 (x = 1.50 m, y = 0.75 m) with 530.0 kN, the least loaded pile 1 with 270.0 kN; none is in tension. The loads add up to ΣP = 2400.0 kN = V, and their moments to ΣPx = 540.0 kN·m = My and ΣPy = 180.0 kN·m = Mx. The largest load is compared with the allowable load of one pile alone; the group as a whole is checked with its efficiency (see pile group efficiency).

Were My raised to 2520 kN·m (ex = 1.05 m, beyond the limit Σx²/(n xmax) = 1.00 m), the piles on the −x side would carry −60.0 kN (pile 1) and 20.0 kN (pile 2): one pile in tension.

6QuestionsShort answers.

Why are all the piles taken as equally stiff?

The rule assumes identical piles: the same section, length and head connection. A shorter or stiffer pile under the same cap attracts more of the load, and a flexible cap passes more of a column load to the piles directly under it.

Is the rigid-cap rule on the safe side?

For the axial loads, yes: the piles also resist the rotation of the cap by their own bending, which the rule leaves out, so the moment is carried entirely by the axial loads. The bending moments at the pile heads come from a lateral analysis of the group.

How is a lateral load on the cap taken?

It adds a moment Hh about the base of the cap, which enters Mx or My. The lateral load itself is shared between the rows of piles through their p–y curves scaled by p-multipliers (see p–y curves for sand and clay).

The theory behind it