GeoTerva مجاناً لمدة 7 أيام

وحدة الحفر المدعّم في الرمل

الضغط الظاهري، الدعامات، كمرات الربط والألواح الساندة في الرمل.

جميع الوحدات متاحة للاستخدام مجاناً لمدة 7 أيام عند إنشاء حساب مجاني. تتوفر هذه الوحدة أيضاً دون الحاجة لتسجيل الدخول عبر مثال محلول: جرب العرض التوضيحي المجاني.

مغلف بيك للرمل مع وجود منسوب المياه الجوفية أسفل أو فوق قاع الحفر، وأحمال الدعامات المحسوبة بطريقة البحور المفصلية، ومعاملات المقطع للألواح وكمرات الربط الأفقية. عند نزح المياه من الحفر، يتم التحقق من معامل الأمان ضد التآكل الأنبوبي (الفوران الهيدروليكي).

تقوم بإدخال

  • عمق وعرض الحفر
  • γ و φ′ للرمل، ومنسوب المياه الجوفية
  • مناسيب الدعامات والمسافات بينها
  • رتب الفولاذ والمعيار الفني

تحصل على

  • مغلف ضغط التربة
  • حمل كل دعامة
  • مقاطع الألواح وكمرات الربط الأفقية
  • معامل الأمان ضد التآكل الأنبوبي (الفوران الهيدروليكي)
الحفريات المدعمة · الحفر المدعّم في الرمل
وحدة الحفر المدعّم في الرمل: شاشاتها حول المثال المحلول، النموذج، النتائج، الحسابات والنظرية

الرسم وحكم الأمان بعد إجراء التحليل.

تعمّق أكثر

المزيد من الوحدات في الحفريات المدعمة

لماذا تمتاز بسهولة الاستخدام

عبر الإنترنت، في متصفحكلا يعمل أي شيء على جهازك سوى المتصفح: افتح الصفحة وابدأ العمل.
بدون مفتاح حماية (Dongle)، ولا يتطلب أي تثبيتلا مفتاح ترخيص، ولا قفل عتاد، ولا تثبيت يحتاج إلى تحديث.
على الهاتف أو اللوحي أو الحاسوب الشخصينفس الوحدة في أي متصفح حديث، مع تخطيط شاشة مخصص للجهاز.

Questions about the Braced cut in sand module

What does the GeoTerva Braced cut in sand module calculate?

Apparent pressure, struts, wales and sheeting in sand. Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.

What do I enter in the Braced cut in sand module?

Cut depth and width; sand γ and φ′, water table; strut levels and spacing; and steel grades and code.

What results does the Braced cut in sand module give?

The pressure envelope; the load of every strut; sheeting and wale sections; and factor of safety against piping. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in sand module use?

Peck (1969); EN 1993-1-1; and AISC 360-22.

How much does the Braced cut in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.