GeoTerva مجاناً لمدة 7 أيام

وحدة قدرة التحمل لمايرشوف

المعادلة العامة مع معاملات الشكل والعمق وميل الحمل.

جميع الوحدات متاحة للاستخدام مجاناً لمدة 7 أيام عند إنشاء حساب مجاني. تتوفر 11 وحدة مفتوحة بالكامل دون الحاجة لتسجيل الدخول عبر مثال محلول: جربها الآن.

معادلة قدرة التحمل العامة لمايرشوف لأي شكل من أشكال القواعد وأي نسبة عمق إلى عرض، تحت حمل رأسي أو مائل. تُطبع معاملات الشكل لدي بير، ومعاملات العمق لهانسن، ومعاملات الميل لمايرشوف مع أرقامها.

تقوم بإدخال

  • قاعدة شريطية، مربعة، مستطيلة أو دائرية
  • عمق التأسيس وميل الحمل
  • c′، φ′، الأوزان الحجمية، منسوب المياه الجوفية
  • معامل الأمان، الإجهاد المطبق

تحصل على

  • qu و qall، الإجمالي والصافي
  • كل معامل مع معادلته
  • آلية الانهيار على المقطع
  • محقق أو غير محقق مقابل الإجهاد المطبق
قدرة التحمل · مايرشوف
وحدة قدرة التحمل لمايرشوف: شاشاتها حول المثال المحلول، النموذج، النتائج، الحسابات والنظرية

الرسم وحكم الأمان بعد إجراء التحليل.

تعمّق أكثر

المزيد من الوحدات في قدرة التحمل

لماذا تمتاز بسهولة الاستخدام

عبر الإنترنت، في متصفحكلا يعمل أي شيء على جهازك سوى المتصفح: افتح الصفحة وابدأ العمل.
بدون مفتاح حماية (Dongle)، ولا يتطلب أي تثبيتلا مفتاح ترخيص، ولا قفل عتاد، ولا تثبيت يحتاج إلى تحديث.
على الهاتف أو اللوحي أو الحاسوب الشخصينفس الوحدة في أي متصفح حديث، مع تخطيط شاشة مخصص للجهاز.

Questions about the Meyerhof module

What does the GeoTerva Meyerhof module calculate?

The general equation with shape, depth and inclination factors. Meyerhof’s general bearing capacity equation for any footing shape and any depth-to-width ratio, under a vertical or an inclined load. The shape factors of De Beer, the depth factors of Hansen and Meyerhof’s inclination factors are each printed with their numbers.

What do I enter in the Meyerhof module?

Strip, square, rectangular or circular footing; embedment depth and load inclination; c′, φ′, unit weights, water table; and factor of safety, applied pressure.

What results does the Meyerhof module give?

qu and qall, gross and net; every factor with its formula; the mechanism on the section; and PASS or FAIL against the applied pressure. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Meyerhof module use?

Meyerhof (1963); de Beer shape factors; and hansen depth factors.

How much does the Meyerhof module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Bearing Capacity pack (5 modules): $199 a year or $20 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Meyerhof module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.