GeoTerva مجاناً لمدة 7 أيام

وحدة قدرة التحمل لهانسن

معادلة واحدة لسطح الأرض المائل والقاعدة المائلة والحمل المائل.

جميع الوحدات متاحة للاستخدام مجاناً لمدة 7 أيام عند إنشاء حساب مجاني. تتوفر 11 وحدة مفتوحة بالكامل دون الحاجة لتسجيل الدخول عبر مثال محلول: جربها الآن.

تغطي معادلة هانسن التصحيحات الثلاثة التي تغفلها المعادلات الكلاسيكية: القاعدة القريبة من منحدر، والقاعدة غير الأفقية، والحمل غير الرأسي. يتم استخدام معامل Nγ الخاص بهانسن، وتُكتب جميع المعاملات بالتفصيل.

تقوم بإدخال

  • أبعاد وعمق القاعدة
  • ميل سطح الأرض وميل القاعدة
  • ميل الحمل
  • مقاومة التربة، منسوب المياه الجوفية، معامل الأمان

تحصل على

  • qu و qall
  • معاملات الشكل، العمق، الميل، القاعدة وصفحة الأرض
  • المقطع مع المنحدر والميل
  • التحقق مقابل الإجهاد المطبق
قدرة التحمل · هانسن
وحدة قدرة التحمل لهانسن: شاشاتها حول المثال المحلول، النموذج، النتائج، الحسابات والنظرية

الرسم وحكم الأمان بعد إجراء التحليل.

تعمّق أكثر

المزيد من الوحدات في قدرة التحمل

لماذا تمتاز بسهولة الاستخدام

عبر الإنترنت، في متصفحكلا يعمل أي شيء على جهازك سوى المتصفح: افتح الصفحة وابدأ العمل.
بدون مفتاح حماية (Dongle)، ولا يتطلب أي تثبيتلا مفتاح ترخيص، ولا قفل عتاد، ولا تثبيت يحتاج إلى تحديث.
على الهاتف أو اللوحي أو الحاسوب الشخصينفس الوحدة في أي متصفح حديث، مع تخطيط شاشة مخصص للجهاز.

Questions about the Hansen module

What does the GeoTerva Hansen module calculate?

One equation for sloping ground, a tilted base and an inclined load. Hansen’s equation covers the three corrections that the classical equations leave out: a footing near a slope, a base that is not horizontal and a load that is not vertical. Hansen’s own Nγ is used, and every factor is written out.

What do I enter in the Hansen module?

Footing geometry and depth; ground slope and base tilt; load inclination; and soil strength, water table, factor of safety.

What results does the Hansen module give?

qu and qall; shape, depth, inclination, base and ground factors; the section with the slope and the tilt; and the check against the applied pressure. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Hansen module use?

Hansen (1970).

How much does the Hansen module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Bearing Capacity pack (5 modules): $199 a year or $20 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Hansen module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.