Hansen 公式考虑了传统公式忽略的三项修正:临近边坡的基础、非水平基底以及倾斜荷载。模块采用 Hansen 专属的 Nγ,并列出各修正系数的具体计算式。
输入参数
- 基础几何尺寸与埋深
- 地表坡度与基底倾角
- 荷载倾角
- 土体强度、地下水位、安全系数
您将得到
- qu 与 qall
- 形状、埋深、倾斜、基底及地表系数
- 包含坡度与倾角的基础剖面图
- 针对施加压力的验算

计算后的计算图形与判定结论。
Hansen 公式考虑了传统公式忽略的三项修正:临近边坡的基础、非水平基底以及倾斜荷载。模块采用 Hansen 专属的 Nγ,并列出各修正系数的具体计算式。
输入参数
您将得到

计算后的计算图形与判定结论。
One equation for sloping ground, a tilted base and an inclined load. Hansen’s equation covers the three corrections that the classical equations leave out: a footing near a slope, a base that is not horizontal and a load that is not vertical. Hansen’s own Nγ is used, and every factor is written out.
Footing geometry and depth; ground slope and base tilt; load inclination; and soil strength, water table, factor of safety.
qu and qall; shape, depth, inclination, base and ground factors; the section with the slope and the tilt; and the check against the applied pressure. Every step of the working is written out, and the results go into a Word or PDF report.
Hansen (1970).
Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Bearing Capacity pack (5 modules): $199 a year or $20 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.
Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.