GeoTerva Бесплатно на 7 дней

Модуль расчёта несущей способности сваи в многослойном грунте

Слои песка и глины вдоль ствола с отдельным методом для каждого слоя.

Каждый модуль доступен бесплатно на 7 дней при создании аккаунта. Этот модуль можно открыть и без регистрации на готовом примере: запустить бесплатное демо.

Произвольная толща слоёв песка и глины, каждый из которых задаётся отдельно. Сопротивление по боковой поверхности каждого слоя вычисляется по методу для соответствующего грунта, а сопротивление под нижним концом — по методу для грунта, в котором расположен конец сваи.

Вы вводите

  • Геометрия сваи
  • До восьми слоев песка или глины
  • Уровень грунтовых вод (УГВ)
  • Метод для каждого типа грунта

Вы получаете

  • Qp, Qs, Qu и Qall
  • Вклад каждого слоя
  • Эпюры сопротивления по боковой поверхности и под нижним концом
  • 3D-вид слоёв и сваи
Свайные фундаменты · Свая в многослойном грунте
Модуль расчёта несущей способности сваи в многослойном грунте: экраны примера расчёта, модели, результатов, расчётов и теории

Чертеж и результат проверки после выполнения расчета.

Узнать больше

Другие модули раздела «Свайные фундаменты»

Почему это удобно

Онлайн, в вашем браузереНа вашем устройстве запускается только браузер: откройте страницу и работайте.
Без аппаратных ключей и установкиНикаких лицензионных ключей, защитных USB-ключей и обновлений дистрибутива.
На смартфоне, планшете или ПКОдин и тот же модуль в любом современном браузере с адаптивным интерфейсом.

Questions about the Pile on layered soil module

What does the GeoTerva Pile on layered soil module calculate?

Sand and clay layers along the shaft, each with its own method. Any stack of sand and clay layers, each typed on its own. The shaft resistance of each layer is computed by the method of its soil, and the point bearing by the method for the soil the tip stands in.

What do I enter in the Pile on layered soil module?

Pile geometry; up to eight layers, sand or clay; water table; and A method for each soil type.

What results does the Pile on layered soil module give?

Qp, Qs, Qu and Qall; the share of every layer; diagrams of the shaft and point resistance; and A 3D view of the layers and the pile. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile on layered soil module use?

K–δ; coyle & Castello; and α, λ, β.

How much does the Pile on layered soil module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile on layered soil module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.