GeoTerva Grátis por 7 dias

Módulo de estabilidade de talude infinito

Uma superfície de ruptura plana paralela ao terreno, com percolação, razão de poropressão e sismo.

Todos os módulos podem ser abertos gratuitamente por 7 dias com uma conta gratuita. Onze módulos abrem sem necessidade de conta, com um exemplo resolvido: Experimente.

O fator de segurança de um talude infinitamente longo ao deslizamento em um plano paralelo ao terreno a uma dada profundidade, em solo drenado c′–φ′ ou não drenado, sem poropressão, com nível freático e fluxo paralelo ao talude ou razão de poropressão, e sismo pseudo-estático opcional. A profundidade e a inclinação do talude para o fator de segurança requerido, a profundidade crítica, o coeficiente de plastificação e gráficos do fator de segurança acompanham a análise.

Dados de entrada

  • Inclinação do talude e profundidade do plano
  • Solo: c′, φ′ ou cu, pesos específicos
  • Nível do lençol freático ou ru
  • Sismo: kh e kv
  • Fator de segurança requerido

Você obtém

  • Fator de segurança em relação ao valor requerido, estático e com sismo
  • Coeficiente de plastificação, profundidade e ângulo no fator de segurança requerido, profundidade crítica
  • O mesmo talude seco e com água na superfície
  • Gráficos em função do ângulo, da profundidade, da água e de kh
Estabilidade de taludes · Talude infinito
Módulo de estabilidade de talude infinito: telas do exemplo resolvido, modelo, resultados, cálculos e teoria

O desenho e o resultado após Calcular.

Ir além

Mais módulos em Estabilidade de taludes

Por que é fácil de usar

Online, no seu navegadorNada é executado na sua máquina além do navegador: abra a página e trabalhe.
Sem dongle, nada a instalarSem chave de licença, sem trava física, sem instalação para atualizar.
No celular, tablet ou PCO mesmo módulo em qualquer navegador atual, com a tela adaptada ao dispositivo.

Questions about the Infinite slope module

What does the GeoTerva Infinite slope module calculate?

A plane failure surface parallel to the ground, with seepage, a pore pressure ratio and an earthquake. The factor of safety of an infinitely long slope against sliding on a plane parallel to the ground at a given depth, in a drained c′–φ′ or an undrained soil, with no pore pressure, a water table with seepage parallel to the slope or a pore pressure ratio, and an optional pseudo-static earthquake. The depth and the slope angle at the required factor of safety, the critical depth, the yield coefficient and charts of the factor of safety come with it.

What do I enter in the Infinite slope module?

Slope angle and depth of the plane; soil: c′, φ′ or cu, unit weights; water table or ru; earthquake: kh and kv; and required factor of safety.

What results does the Infinite slope module give?

Factor of safety against the required value, static and with the earthquake; yield coefficient, depth and angle at the required factor of safety, critical depth; the same slope dry and with the water at the surface; and charts against the angle, the depth, the water and kh. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Infinite slope module use?

Infinite slope; and mohr–Coulomb.

How much does the Infinite slope module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Slope Stability pack (2 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Ground & stability bundle ($499 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Infinite slope module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.