GeoTerva 7일간 무료

무한사면 안정 해석 모듈

침투, 간극수압비 및 지진 영향을 고려한 지표 평행 평면 파괴면 해석이다.

무료 계정 생성 시 모든 모듈을 7일간 무료로 이용할 수 있습니다. 11개 모듈은 계정 없이도 계산 예제로 체험 가능합니다: 체험하기.

배수 c′–φ′ 또는 비배수 지반에서 간극수압이 없거나, 사면과 평행한 침투가 있는 지하수위 조건 또는 간극수압비 조건, 그리고 선택적인 의사정적 지진 하중 조건하에 특정 깊이의 지표면 평행 평면을 따른 무한사면의 활동 안전율을 산정한다. 소요 안전율에서의 깊이 및 사면 경사각, 위험 깊이, 항복지진계수 및 안전율 도표가 함께 제공된다.

입력 항목

  • 사면 경사각 및 파괴면 깊이
  • 지반: c′, φ′ 또는 cu, 단위중량
  • 지하수위 또는 ru
  • 지진: kh 및 kv
  • 소요 안전율

결과

  • 정적 및 지진 시 기준 소요값 대비 안전율
  • 항복지진계수, 소요 안전율에서의 깊이 및 경사각, 위험 깊이
  • 건윤 상태 및 지표면 수위 조건의 동일 사면 비교
  • 경사각, 깊이, 수위 및 kh에 따른 도표
사면안정 · 무한사면
무한사면 안정 해석 모듈: 계산 예제, 모델, 결과, 계산 및 이론 화면

해석 실행 후 단면도 및 적합성 판정.

더 알아보기

사면안정 분야의 다른 모듈

GeoTerva의 장점

웹 브라우저 기반 온디맨드 수행별도 프로그램 설치 없이 브라우저를 열고 바로 해석을 수행합니다.
동글 불필요 · 프로그램 설치 없음라이선스 키, 하드웨어 락, 지속적인 업데이트 설치 과정이 필요하지 않습니다.
스마트폰, 태블릿, PC 완벽 지원모든 최신 브라우저에서 기기 화면에 최적화된 레이아웃으로 모듈을 제공합니다.

Questions about the Infinite slope module

What does the GeoTerva Infinite slope module calculate?

A plane failure surface parallel to the ground, with seepage, a pore pressure ratio and an earthquake. The factor of safety of an infinitely long slope against sliding on a plane parallel to the ground at a given depth, in a drained c′–φ′ or an undrained soil, with no pore pressure, a water table with seepage parallel to the slope or a pore pressure ratio, and an optional pseudo-static earthquake. The depth and the slope angle at the required factor of safety, the critical depth, the yield coefficient and charts of the factor of safety come with it.

What do I enter in the Infinite slope module?

Slope angle and depth of the plane; soil: c′, φ′ or cu, unit weights; water table or ru; earthquake: kh and kv; and required factor of safety.

What results does the Infinite slope module give?

Factor of safety against the required value, static and with the earthquake; yield coefficient, depth and angle at the required factor of safety, critical depth; the same slope dry and with the water at the surface; and charts against the angle, the depth, the water and kh. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Infinite slope module use?

Infinite slope; and mohr–Coulomb.

How much does the Infinite slope module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Slope Stability pack (2 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Ground & stability bundle ($499 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Infinite slope module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.