GeoTerva 7일간 무료

SPT 액상화 평가 모듈

SPT N치를 이용한 액상화 안전율 산정이다.

무료 계정 생성 시 모든 모듈을 7일간 무료로 이용할 수 있습니다. 11개 모듈은 계정 없이도 계산 예제로 체험 가능합니다: 체험하기.

현장의 지진 규모 및 최대지반가속도를 반영하여 모든 시추공의 각 SPT 시험에 대해 Idriss & Boulanger (2014) 방법으로 해석한다.

입력 항목

  • N치, 세립분 함유량, 단위중량이 입력된 시추공
  • 지하수위
  • 지진 규모 및 PGA

결과

  • (N₁)₆₀cs, CSR, CRR, FS
  • 액상화 발생 및 경계 영역
  • 시추공 간 단면
  • 프로젝트 요약
액상화 · SPT 기반 액상화 평가
SPT 기반 액상화 평가 모듈: 계산 예제, 모델, 결과, 계산과정 및 이론 화면

해석 실행 후 단면도 및 적합성 판정.

더 알아보기

액상화 분야의 다른 모듈

GeoTerva의 장점

웹 브라우저 기반 온디맨드 수행별도 프로그램 설치 없이 브라우저를 열고 바로 해석을 수행합니다.
동글 불필요 · 프로그램 설치 없음라이선스 키, 하드웨어 락, 지속적인 업데이트 설치 과정이 필요하지 않습니다.
스마트폰, 태블릿, PC 완벽 지원모든 최신 브라우저에서 기기 화면에 최적화된 레이아웃으로 모듈을 제공합니다.

Questions about the SPT triggering module

What does the GeoTerva SPT triggering module calculate?

Factor of safety against liquefaction from SPT blow counts. The Idriss & Boulanger (2014) procedure for every SPT test of every borehole, with the earthquake magnitude and the peak ground acceleration of the site.

What do I enter in the SPT triggering module?

Boreholes with N, fines and unit weights; water table; and magnitude and PGA.

What results does the SPT triggering module give?

(N₁)₆₀cs, CSR, CRR, FS; triggered and marginal zones; sections between boreholes; and project summary. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the SPT triggering module use?

Idriss & Boulanger (2014).

How much does the SPT triggering module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Liquefaction pack (2 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Ground & stability bundle ($499 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the SPT triggering module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.