GeoTerva 7日間無料

無限斜面安定モジュール

地表面と平行な平面すべりを対象とし、浸透流、間隙水圧比、地震を考慮できます。

無料アカウントがあれば、すべてのモジュールを7日間無料でご利用いただけます。11個のモジュールは、アカウントがなくても計算例で開けます。お試しください。

排水条件のc′–φ′地盤または非排水地盤における、地表面に平行な任意の深さの面に沿ってすべる無限長の斜面の安全率を求めます。間隙水圧なし、斜面に平行な浸透流を伴う地下水位、または間隙水圧比を考慮でき、震度法による地震時の検討も選択できます。所要安全率に対応する深さと斜面角、限界深さ、降伏震度、安全率の図も得られます。

入力するもの

  • 斜面角とすべり面の深さ
  • 地盤:c′、φ′またはcu、単位体積重量
  • 地下水位またはru
  • 地震:khとkv
  • 必要安全率

得られるもの

  • 所要値に対する安全率(常時および地震時)
  • 降伏震度、所要安全率に対応する深さと角度、限界深さ
  • 同じ斜面の乾燥時と水位が地表面にある場合
  • 角度、深さ、水位、khに対する図
斜面安定 · 無限斜面
無限斜面安定モジュール:計算例でのモデル、結果、計算過程、理論の各画面

計算実行後の図と判定。

さらに詳しく

斜面安定のほかのモジュール

使いやすい理由

オンライン、ブラウザーでお使いのコンピューターで動くのはブラウザーだけです。ページを開けば、すぐに作業できます。
ドングル不要、インストール不要ライセンスキーもハードウェアロックも不要で、更新を管理すべきインストールもありません。
スマートフォン、タブレット、PCで最新のブラウザーであれば同じモジュールを利用でき、画面はデバイスに合わせて最適に配置されます。

Questions about the Infinite slope module

What does the GeoTerva Infinite slope module calculate?

A plane failure surface parallel to the ground, with seepage, a pore pressure ratio and an earthquake. The factor of safety of an infinitely long slope against sliding on a plane parallel to the ground at a given depth, in a drained c′–φ′ or an undrained soil, with no pore pressure, a water table with seepage parallel to the slope or a pore pressure ratio, and an optional pseudo-static earthquake. The depth and the slope angle at the required factor of safety, the critical depth, the yield coefficient and charts of the factor of safety come with it.

What do I enter in the Infinite slope module?

Slope angle and depth of the plane; soil: c′, φ′ or cu, unit weights; water table or ru; earthquake: kh and kv; and required factor of safety.

What results does the Infinite slope module give?

Factor of safety against the required value, static and with the earthquake; yield coefficient, depth and angle at the required factor of safety, critical depth; the same slope dry and with the water at the surface; and charts against the angle, the depth, the water and kh. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Infinite slope module use?

Infinite slope; and mohr–Coulomb.

How much does the Infinite slope module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Slope Stability pack (2 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Ground & stability bundle ($499 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Infinite slope module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.