GeoTerva 7 दिनों के लिए निःशुल्क

Meyerhof धारण क्षमता मॉड्यूल

आकृति, गहराई और झुकाव गुणांकों के साथ सामान्य समीकरण।

प्रत्येक मॉड्यूल निःशुल्क खाते के साथ 7 दिनों के लिए खोलने हेतु निःशुल्क है। एक हल किए गए उदाहरण पर, बिना किसी खाते के भी ग्यारह मॉड्यूल खुलते हैं: उन्हें आज़माएं।

किसी भी फ़ुटिंग आकृति और किसी भी गहराई-से-चौड़ाई अनुपात के लिए, ऊर्ध्वाधर या झुके हुए भार के तहत Meyerhof का सामान्य धारण क्षमता समीकरण। De Beer के आकृति गुणांक, Hansen के गहराई गुणांक और Meyerhof के झुकाव गुणांक प्रत्येक उनकी संख्याओं के साथ मुद्रित होते हैं।

आप दर्ज करते हैं

  • स्ट्रिप, वर्गाकार, आयताकार या वृत्ताकार फ़ुटिंग
  • नींव की गहराई और भार-झुकाव
  • c′, φ′, इकाई भार, जल स्तर
  • सुरक्षा गुणांक, प्रयुक्त दाब

आपको मिलता है

  • qu और qall, सकल और शुद्ध
  • अपने सूत्र के साथ प्रत्येक गुणांक
  • काट पर तंत्र
  • प्रयुक्त दाब के विरुद्ध PASS या FAIL
धारण क्षमता · Meyerhof
Meyerhof धारण क्षमता मॉड्यूल: हल किए गए उदाहरण, मॉडल, परिणाम, गणनाओं और सिद्धांत पर इसकी स्क्रीन

विश्लेषण के बाद आरेख और निर्णय।

आगे बढ़ें

धारण क्षमता में अधिक मॉड्यूल

यह उपयोग में आसान क्यों है

ऑनलाइन, आपके ब्राउज़र मेंआपके कंप्यूटर पर ब्राउज़र के अलावा कुछ नहीं चलता: पेज खोलें और काम करें।
कोई डोंगल नहीं, कुछ भी इंस्टॉल करने की आवश्यकता नहींकोई लाइसेंस कुंजी नहीं, कोई हार्डवेयर लॉक नहीं, अद्यतन रखने के लिए कोई इंस्टॉलेशन नहीं।
फ़ोन, टैबलेट या पीसी परकिसी भी वर्तमान ब्राउज़र में वही मॉड्यूल, डिवाइस के लिए व्यवस्थित स्क्रीन लेआउट के साथ।

Questions about the Meyerhof module

What does the GeoTerva Meyerhof module calculate?

The general equation with shape, depth and inclination factors. Meyerhof’s general bearing capacity equation for any footing shape and any depth-to-width ratio, under a vertical or an inclined load. The shape factors of De Beer, the depth factors of Hansen and Meyerhof’s inclination factors are each printed with their numbers.

What do I enter in the Meyerhof module?

Strip, square, rectangular or circular footing; embedment depth and load inclination; c′, φ′, unit weights, water table; and factor of safety, applied pressure.

What results does the Meyerhof module give?

qu and qall, gross and net; every factor with its formula; the mechanism on the section; and PASS or FAIL against the applied pressure. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Meyerhof module use?

Meyerhof (1963); de Beer shape factors; and hansen depth factors.

How much does the Meyerhof module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Bearing Capacity pack (5 modules): $199 a year or $20 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Meyerhof module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.