GeoTerva Gratuit pendant 7 jours

Module de stabilité de pente infinie

Une surface de rupture plane parallèle au terrain, avec écoulement, rapport de pression interstitielle et séisme.

Chaque module peut être ouvert gratuitement pendant 7 jours avec un compte gratuit.Onze modules s’ouvrent sans aucun compte, sur un exemple de calcul : essayez-les.

Le coefficient de sécurité d’une pente de longueur infinie vis-à-vis du glissement sur un plan parallèle au terrain à une profondeur donnée, dans un sol drainé c′–φ′ ou non drainé, sans pression interstitielle, avec une nappe et un écoulement parallèle à la pente ou avec un coefficient de pression interstitielle, et avec un séisme pseudo-statique facultatif. La profondeur et l’angle de pente correspondant au coefficient de sécurité requis, la profondeur critique, le coefficient sismique critique et des graphiques du coefficient de sécurité sont également fournis.

Vous saisissez

  • Angle de pente et profondeur du plan
  • Sol : c′, φ′ ou cu, poids volumiques
  • Nappe ou ru
  • Séisme : kh et kv
  • Coefficient de sécurité requis

Vous obtenez

  • Coefficient de sécurité comparé à la valeur requise, en statique et avec le séisme
  • Coefficient sismique critique, profondeur et angle au coefficient de sécurité requis, profondeur critique
  • La même pente sèche et avec l’eau en surface
  • Graphiques en fonction de l’angle, de la profondeur, de l’eau et de kh
Stabilité des pentes · Pente infinie
Module de stabilité de pente infinie : ses écrans sur l’exemple de calcul — modèle, résultats, calculs et théorie

Le dessin et le verdict après le calcul.

Pour aller plus loin

Autres modules du pack Stabilité des pentes

Pourquoi il est facile à utiliser

En ligne, dans votre navigateurRien ne s’exécute sur votre machine hormis le navigateur : ouvrez la page et travaillez.
Sans dongle, rien à installerNi clé de licence, ni verrou matériel, ni installation à tenir à jour.
Sur smartphone, tablette ou PCLe même module dans tout navigateur récent, avec un écran adapté à l’appareil.

Questions about the Infinite slope module

What does the GeoTerva Infinite slope module calculate?

A plane failure surface parallel to the ground, with seepage, a pore pressure ratio and an earthquake. The factor of safety of an infinitely long slope against sliding on a plane parallel to the ground at a given depth, in a drained c′–φ′ or an undrained soil, with no pore pressure, a water table with seepage parallel to the slope or a pore pressure ratio, and an optional pseudo-static earthquake. The depth and the slope angle at the required factor of safety, the critical depth, the yield coefficient and charts of the factor of safety come with it.

What do I enter in the Infinite slope module?

Slope angle and depth of the plane; soil: c′, φ′ or cu, unit weights; water table or ru; earthquake: kh and kv; and required factor of safety.

What results does the Infinite slope module give?

Factor of safety against the required value, static and with the earthquake; yield coefficient, depth and angle at the required factor of safety, critical depth; the same slope dry and with the water at the surface; and charts against the angle, the depth, the water and kh. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Infinite slope module use?

Infinite slope; and mohr–Coulomb.

How much does the Infinite slope module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Slope Stability pack (2 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Ground & stability bundle ($499 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Infinite slope module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.