1The formulaBoussinesq integrated over a rectangle.
Integrating Boussinesq’s point-load solution over a rectangle B × L carrying a uniform pressure q gives the vertical stress below one of its corners at depth z (Newmark, 1935); Fadum (1948) drew it as the well-known chart:
When the denominator of the arctangent is negative, π is added to its angle. The stress at any other point is the sum (or difference) of the corner stresses of rectangles that have that point as their common corner: below the centre, four rectangles B/2 × L/2.
2Table of the influence factorm and n from 0.1 to 5.
| n \ m | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.5 | 2.0 | 3.0 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.1 | 0.0047 | 0.0092 | 0.0132 | 0.0168 | 0.0198 | 0.0222 | 0.0258 | 0.0279 | 0.0304 | 0.0311 | 0.0315 |
| 0.2 | 0.0092 | 0.0179 | 0.0259 | 0.0328 | 0.0387 | 0.0435 | 0.0504 | 0.0547 | 0.0595 | 0.0610 | 0.0618 |
| 0.3 | 0.0132 | 0.0259 | 0.0374 | 0.0474 | 0.0559 | 0.0629 | 0.0731 | 0.0794 | 0.0864 | 0.0887 | 0.0898 |
| 0.4 | 0.0168 | 0.0328 | 0.0474 | 0.0602 | 0.0711 | 0.0801 | 0.0931 | 0.1013 | 0.1105 | 0.1134 | 0.1150 |
| 0.5 | 0.0198 | 0.0387 | 0.0559 | 0.0711 | 0.0840 | 0.0947 | 0.1103 | 0.1202 | 0.1314 | 0.1350 | 0.1368 |
| 0.6 | 0.0222 | 0.0435 | 0.0629 | 0.0801 | 0.0947 | 0.1069 | 0.1247 | 0.1360 | 0.1490 | 0.1533 | 0.1555 |
| 0.8 | 0.0258 | 0.0504 | 0.0731 | 0.0931 | 0.1103 | 0.1247 | 0.1461 | 0.1598 | 0.1758 | 0.1812 | 0.1841 |
| 1.0 | 0.0279 | 0.0547 | 0.0794 | 0.1013 | 0.1202 | 0.1360 | 0.1598 | 0.1752 | 0.1936 | 0.1999 | 0.2034 |
| 1.2 | 0.0293 | 0.0573 | 0.0832 | 0.1063 | 0.1263 | 0.1431 | 0.1684 | 0.1851 | 0.2053 | 0.2124 | 0.2163 |
| 1.5 | 0.0304 | 0.0595 | 0.0864 | 0.1105 | 0.1314 | 0.1490 | 0.1758 | 0.1936 | 0.2157 | 0.2236 | 0.2282 |
| 2.0 | 0.0311 | 0.0610 | 0.0887 | 0.1134 | 0.1350 | 0.1533 | 0.1812 | 0.1999 | 0.2236 | 0.2325 | 0.2378 |
| 2.5 | 0.0314 | 0.0615 | 0.0895 | 0.1145 | 0.1363 | 0.1548 | 0.1832 | 0.2024 | 0.2268 | 0.2361 | 0.2420 |
| 3.0 | 0.0315 | 0.0618 | 0.0898 | 0.1150 | 0.1368 | 0.1555 | 0.1841 | 0.2034 | 0.2282 | 0.2378 | 0.2439 |
| 5.0 | 0.0316 | 0.0620 | 0.0901 | 0.1154 | 0.1374 | 0.1561 | 0.1849 | 0.2044 | 0.2296 | 0.2395 | 0.2461 |
The table is symmetric in m and n. Values computed by GeoTerva with the formula above.
3Worked exampleA 2 m × 3 m footing, 150 kPa.
A footing B × L = 2 m × 3 m carries q = 150 kPa. Below its centre at z = 2 m, it is split into four rectangles of 1.0 m × 1.5 m: m = 1.0/2 = 0.50, n = 1.5/2 = 0.75, I3 = 0.1071.
σz = 4 × q × I3 = 4 × 150 × 0.1071 = 64.2 kPa. Below a corner of the footing at the same depth (m = 1.00, n = 1.50, I3 = 0.1936) it is only 29.0 kPa.
4QuestionsShort answers.
What are m and n?
m = B/z and n = L/z: the two sides of the loaded rectangle divided by the depth of the point, both measured from the corner above it.
How do I find the stress below the centre?
Divide the footing into four equal rectangles meeting at the centre and add their four corner stresses: σz = 4qI3(B/2z, L/2z).
What is the stress for a very large area?
As m and n grow, I3 approaches 0.25 at a corner, so the four corners below the centre add up to q: the full surface pressure.