1Boussinesq’s solutionA point load on an elastic half-space.
Boussinesq (1883) found the stresses in a homogeneous, isotropic, linearly elastic half-space under a vertical point load P on its surface. The vertical stress at depth z and horizontal distance r from the load does not depend on the elastic constants:
2Table of the influence factorr/z from 0 to 3.
| r/z | IB |
|---|---|
| 0.0 | 0.4775 |
| 0.1 | 0.4657 |
| 0.2 | 0.4329 |
| 0.3 | 0.3849 |
| 0.4 | 0.3295 |
| 0.5 | 0.2733 |
| 0.6 | 0.2214 |
| 0.7 | 0.1762 |
| 0.8 | 0.1386 |
| 0.9 | 0.1083 |
| 1.0 | 0.0844 |
| 1.1 | 0.0658 |
| 1.2 | 0.0513 |
| 1.3 | 0.0402 |
| 1.4 | 0.0317 |
| 1.5 | 0.0251 |
| 1.6 | 0.0200 |
| 1.7 | 0.0160 |
| 1.8 | 0.0129 |
| 1.9 | 0.0105 |
| 2.0 | 0.0085 |
| 2.1 | 0.0070 |
| 2.2 | 0.0058 |
| 2.3 | 0.0048 |
| 2.4 | 0.0040 |
| 2.5 | 0.0034 |
| 2.6 | 0.0028 |
| 2.7 | 0.0024 |
| 2.8 | 0.0021 |
| 2.9 | 0.0018 |
| 3.0 | 0.0015 |
σz = (P/z²)·IB. Directly below the load (r = 0) IB = 3/(2π) = 0.4775. Values computed by GeoTerva.
3Worked exampleA column load of 500 kN.
A column transmits P = 500 kN to the ground. At z = 2 m depth and r = 1 m from its axis, r/z = 0.50 and the table gives IB = 0.2733:
σz = (P/z²)·IB = (500 / 2²) × 0.2733 = 34.2 kPa. Directly below the column it is 59.7 kPa.
4QuestionsShort answers.
Does the Boussinesq stress depend on the soil’s modulus?
No. The vertical stress σz under a point load depends only on P, z and r; the elastic constants enter the horizontal stresses and the displacements, not σz.
How is a footing treated?
A footing is not a point: its pressure is integrated over its area (rectangle, strip, circle). Far below a small footing (z greater than about three times its width) the point-load solution is a good approximation.
What is IB directly below the load?
3/(2π) = 0.4775, so σz = 0.4775·P/z².