GeoTerva مجاناً لمدة 7 أيام

وحدة ضغط التربة في حالة السكون (K0)

ضغط التربة الجانبي خلف جدار ثابت لا يتحرك.

جميع الوحدات متاحة للاستخدام مجاناً لمدة 7 أيام عند إنشاء حساب مجاني. تتوفر 11 وحدة مفتوحة بالكامل دون الحاجة لتسجيل الدخول عبر مثال محلول: جربها الآن.

ضغط التربة في حالة السكون على جدار غير منزلق ذي ردم أفقـي متعدد الطبقات ومنسوب مياه جوفية عند أي عمق. يُحسب معامل K₀ لكل طبقة: Jaky أو Mayne & Kulhawy لأي تربة، وMassarsch للطين، وSherif للرمل المدموك، أو قيمة يُدخلها المستخدم.

تقوم بإدخال

  • الطبقات المعرفة بـ γ و φ′ و OCR
  • منسوب المياه الجوفية
  • الحمل الإضافي
  • طريقة K₀

تحصل على

  • معامل K₀ لكل طبقة
  • مخطط الضغط والمحصلة
  • خط التأثير
  • عرض ⁦3D⁩
الضغط الجانبي للتربة · في حالة السكون (K₀)
وحدة ضغط التربة في حالة السكون (K0): شاشاتها في المثال المحلول والنموذج والنتائج والحسابات والنظرية

الرسم وحكم الأمان بعد إجراء التحليل.

تعمّق أكثر

المزيد من الوحدات في الضغط الجانبي للتربة

لماذا تمتاز بسهولة الاستخدام

عبر الإنترنت، في متصفحكلا يعمل أي شيء على جهازك سوى المتصفح: افتح الصفحة وابدأ العمل.
بدون مفتاح حماية (Dongle)، ولا يتطلب أي تثبيتلا مفتاح ترخيص، ولا قفل عتاد، ولا تثبيت يحتاج إلى تحديث.
على الهاتف أو اللوحي أو الحاسوب الشخصينفس الوحدة في أي متصفح حديث، مع تخطيط شاشة مخصص للجهاز.

Questions about the At rest (K₀) module

What does the GeoTerva At rest (K₀) module calculate?

Earth pressure behind a wall that does not move. The at-rest pressure on a non-yielding wall with a layered, level backfill and a water table at any depth. Each layer takes its own K₀: Jaky or Mayne & Kulhawy for any soil, Massarsch for clay, Sherif for compacted sand, or a value you give.

What do I enter in the At rest (K₀) module?

Layers with γ, φ′ and OCR; water table; surcharge; and K₀ method.

What results does the At rest (K₀) module give?

K₀ of every layer; pressure diagram and resultant; line of action; and 3D view. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the At rest (K₀) module use?

Jaky; mayne & Kulhawy; massarsch; and sherif.

How much does the At rest (K₀) module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Lateral Earth Pressure pack (7 modules): $149 a year or $15 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the At rest (K₀) module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.