1The procedureDemand against resistance.
In the simplified procedure a sand layer liquefies when the cyclic stress ratio of the earthquake, CSR, reaches its cyclic resistance ratio, CRR. Idriss and Boulanger (2014) give CRR for a magnitude 7.5 earthquake and an effective overburden of one atmosphere from the clean-sand equivalent blow count:
with N = (N1)60cs ≤ 37. The clean-sand blow count adds a fines correction to (N1)60:
CRR is then scaled to the design magnitude (MSF) and overburden (Kσ), and the factor of safety is FS = CRR/CSR.
2Table of CRR(N1)60cs from 2 to 37.
| (N1)60cs | CRR7.5 |
|---|---|
| 2 | 0.070 |
| 3 | 0.075 |
| 4 | 0.080 |
| 5 | 0.086 |
| 6 | 0.092 |
| 7 | 0.098 |
| 8 | 0.105 |
| 9 | 0.111 |
| 10 | 0.118 |
| 11 | 0.125 |
| 12 | 0.132 |
| 13 | 0.140 |
| 14 | 0.148 |
| 15 | 0.156 |
| 16 | 0.165 |
| 17 | 0.174 |
| 18 | 0.184 |
| 19 | 0.194 |
| 20 | 0.206 |
| 21 | 0.219 |
| 22 | 0.233 |
| 23 | 0.249 |
| 24 | 0.268 |
| 25 | 0.290 |
| 26 | 0.316 |
| 27 | 0.347 |
| 28 | 0.384 |
| 29 | 0.429 |
| 30 | 0.485 |
| 31 | 0.555 |
| 32 | 0.644 |
| 33 | 0.759 |
| 34 | 0.909 |
| 35 | 1.108 |
| 36 | 1.378 |
| 37 | 1.750 |
Idriss and Boulanger (2014); values computed by GeoTerva with the function its SPT liquefaction module uses.
| FC (%) | Δ(N1)60 |
|---|---|
| 0 | 0.00 |
| 5 | 0.00 |
| 10 | 1.15 |
| 15 | 3.26 |
| 20 | 4.48 |
| 25 | 5.07 |
| 30 | 5.36 |
| 35 | 5.51 |
| 50 | 5.61 |
3Worked exampleA silty sand, FC = 20 %.
A silty sand has (N1)60 = 12 and FC = 20 %. Table 2 gives Δ(N1)60 = 4.48, so (N1)60cs = 16.48 and CRR7.5 = 0.169.
For a magnitude 7.5 earthquake that causes CSR = 0.20 at about one atmosphere of overburden, FS = 0.169 / 0.20 = 0.85: the layer is expected to liquefy.
4QuestionsShort answers.
What is (N1)60cs?
The SPT blow count corrected to 60 % hammer energy (N60), to an effective overburden of one atmosphere (N1) and to the clean-sand equivalent of a soil with fines (cs).
Why is CRR limited at 37?
Dense sands with (N1)60cs above about 37 are considered too dilative to liquefy; the curve rises steeply towards that value.
Is CRR the same for every earthquake?
No. The table is for magnitude 7.5 at one atmosphere; smaller earthquakes have fewer cycles and a higher resistance (magnitude scaling factor MSF > 1), and a higher overburden lowers it (Kσ < 1).