GeoTerva Open the module

Formulas and tables · Consolidation

Time factor Tv and degree of consolidation U: formulas and table

How long a clay layer takes to consolidate: Terzaghi’s one-dimensional solution, its two well-known approximations and the time factor for every 5 % of consolidation.

  • Free to read
  • U = 5–99 %
  • Exact and approximate
  • Worked example

1The time factorTime made dimensionless.

Terzaghi’s theory of one-dimensional consolidation gives the average degree of consolidation U of a clay layer as a function of one number, the time factor:

Tv=cvtHdr2

cv is the coefficient of consolidation and Hdr the drainage path: half the layer thickness when it drains at the top and the bottom, the whole thickness when it drains on one side only.

2The exact solutionA series, for a uniform initial excess pore pressure.

U=1−∑m=0∞2M2e−M2Tv,M=π(2m+1)2

Two approximations are used in practice:

Tv=π4U2(U<60%)
Tv=1.781−0.933log10(100−U%)(U≥60%)

3Table of Tv against UFrom 5 % to 99 %.

Table 1. Time factor against average degree of consolidation
U (%)Tv exactTv approximation
50.00200.0020
100.00790.0079
150.01770.0177
200.03140.0314
250.04910.0491
300.07070.0707
350.09620.0962
400.12570.1257
450.15910.1590
500.19670.1963
550.23890.2376
600.28640.2863
650.34040.3404
700.40290.4028
750.47670.4767
800.56720.5671
850.68380.6837
900.84810.8480
951.12901.1289
991.78131.7810

Exact: Terzaghi’s series, inverted numerically by GeoTerva. Approximation: π/4·U² below 60 %, 1.781 − 0.933 log10(100 − U%) above.

4Worked exampleA clay layer drained top and bottom.

A clay layer 4 m thick drains into sand above and below, so Hdr = 2 m; cv = 2 m²/year. For 90 % consolidation the table gives Tv = 0.848, so

t90 = TvHdr²/cv = 0.848 × 2² / 2 = 1.70 years. Had the layer drained on one side only (Hdr = 4 m), the same consolidation would take four times as long: 6.8 years.

5QuestionsShort answers.

What is Tv for 50 % and 90 % consolidation?

T50 = 0.197 and T90 = 0.848.

What is the drainage path Hdr?

The longest distance pore water travels to a free-draining boundary: half the thickness of a layer drained at both faces, the full thickness of a layer drained at one face only.

Does the time factor depend on the load?

No. In Terzaghi’s theory the degree of consolidation against time depends only on cv, the drainage path and the initial distribution of excess pore pressure (uniform in this table), not on the size of the load.

The theory behind it